Log-in
 

On The Eighth Day of Christmas

Posted on November 27, 2015 by Rae | 1 comment

Sam made a beautiful Mistletoe Wreath!

The simple beauty of this wreath has got me seriously changing my opinion of sewn Christmas door wreaths.  I usually make my own up from the trimmings from the Christmas tree and whatever berries and winter foliage I can scavenge from the woods near my house (that's the traditional thing, right?  Finding beauty in Nature, even on the darkest of days?)  I must admit to not being a big fan of sewn Christmas wreaths in general but this year, I've been converted!  I just can't get over how beautiful this looks. I really don't think my photos do it justice! Also I absolutely LOVE free motion embroidery - it's the most addictive thing.  Not tried it yet?  Do.  Now!

 

Over to Sam...

 

You will need:

 

Green cotton fabric – I used Winter Wonderland Mistletoe by Dashwood Studio

Bondaweb

Hessian/firm linen fabric for backing

12” twig wreath – mine is from Hobbycraft

2m white bobble trim

8mm pearl beads

Fabric glue – I used Gutermann HT2

 

Sewing machine with darning/embroidery foot

Mistletoe template (if you google 'mistletoe' you're bound to find something you can print and use as a template)

 

How to make it:

1. Start by cutting out your mistletoe template and drawing round it onto the back of your green cotton fabric as many times as you want.  I used several different templates – actually all cut from the same picture; I cut the large template up into smaller ones once I’d traced it a couple of times.  Make a few more than you think you’ll need. 

2.  Cut a piece of Bondaweb large enough to cover all your mistletoe shapes and iron it on to the back of the fabric, glue side down on the fabric.  Protect your iron with a piece of greaseproof paper between the iron and the Bondaweb to ensure you don’t get any glue on the iron, or ironing board.

3.  Peel the paper backing off the Bondaweb and cut out your mistletoe shapes. 

 

4.  Place these onto the hessian/linen fabric, protect with some more greaseproof paper and iron in place.  Leave enough space between each shape so that you can cut them out with a little border of hessian showing.

 

 

5.  Lower the feed dogs on your sewing machine and put the darning/embroidery foot on.  Using a thread colour of your choice (I used black so it stands out, but for a subtler look you could use a thread that matches your fabric) stitch around each shape, just inside the edge.  I like to go round a couple of times to catch any bits I missed the first time and to give more definition.

 

 

 6.  Cut the mistletoe leaves out, leaving a small border of hessian around the edge of each one.

 


7.  Sew a few pearl beads on some of the leaves – I just put beads on the largest pieces, but you could do them all if you like – for the berries.

 

8.  Take your twig wreath and wrap some white bobble trim round it.  I used 2 metres, which gave me enough to tie a nice big bow at the top.

 

 

9.  Start arranging your leaves on the wreath until you get a design you are happy with.  You could put leaves the whole way round, or just part way like I’ve done.   I tucked some of them under the bobble trim for a bit of variety. 

 

10.  One piece at a time, glue the leaves onto the wreath.  On the larger pieces I put glue all the way down the central “branch” of the mistletoe, but on the smaller pieces I glued each one dependant on where the leaves touched the twig wreath.  Because the wreath is uneven, you will find the leaves need glue in different places.  Leave the wreath lying flat until the glue is dry.  If you wish, you can add a hanging loop to the back.

 

This looks soooo beautiful indoors or outdoors.  Thank you so much Sam for another amazingly clear tutorial.  Can't wait to make mine!

 

If you hurry, there's still 15% off this fabric and all our Christmas fabrics until midnight tonight!

Happy Stitching!

 

 

 

 

 

 

 

Continue reading →

On the Seventh Day of Christmas

Posted on November 20, 2015 by Rae | 0 comments

Karen gave us a tutorial for making this cute little owl pincushion!

This is such a gorgeous little project!  As the weather turns colder (yes, there's even a flurry of snow forecast for tonight!) we're stepping up our preparations for the big day.You can make this as a pin cushion to give to sewing friends, family or for your kids' teachers as a Christmas gift but we couldn't resist making it up into a Christmas decoration too, by adding a little hanging string.

This is such a simple make and an ideal scrap buster needing only 3 pieces of fabric measuring a teensie 6cm by 11cm each! 

Over to Karen for the tutorial:

You will need:

  • 1x piece of fabric a minimum of 6cm wide by 11cm high for the owl's front
  • 2x pieces of fabric a minimum of 6cm wide by 11cm high for the owl's back
  • wool and embroidery floss for owl's feathers and beak
  • 2x buttons or more embroidery floss for eyes
  • 1x large button for the base
  • rice/wool balls/toy stuffing
  • thread
  • needle
  • scissors

(use a ¼ “seam throughout)

1. Cut two of the template shapes above out of the fabric you have chosen for your owl's back and one from the fabric chosen for the front. To print your template, hover over the template picture above, right click your mouse and copy and paste it into a word document.  Resize the picture so that it is about 12cm high and then print, making sure your printer is set to 'actual size'.  If you have trouble with this, email us at hello@fabrichq.co.uk and we can send you a PDF of the template.

 

2. With right sides together, sew the two back pieces together along one long curved seam,.Open out, the place the front piece, again right sides together, against the back.

3. In one long seam, start at the bottom edge, go up to the top point and go down the other side, leaving the bottom seam open. Trim the seam at the point and turn right side out. 

 

4. With the front piece facing, fold you shape flat and tack a line of small stitches 1” down from the point as this area doesn’t need stuffing. Turn a small hem up around the bottom and sew with a strong thread, leaving the end free for drawing up.

5. Stuff the body using either toy filling, wool balls, rice or a combo of each. If you are using your owl as a pin cushion you may want to use a combination of wool balls or toy filling at the top and rice at the bottom to help weight your owl down and stop her falling over.

6. Then draw up the thread at the base, putting a few stitches in to keep it closed.

 

7. Cut the wool into 4 or 5 strands, each 2” - 3” long and lay along the line of the tacking. Keep in place with a few stitches.

8. Then fold over the point at the line of tacking, then remove your temporary stitches, this creates your owl's face.

9. Use the embroidery thread to make a few straight stitches to hold the point in place and form the beak.

10. Attach the large button to the base of the owl to cover your drawing in stitches and to form a steady base.

 

11. Sew on buttons for eyes or use you embroidery floss to sew some star bursts for eyes instead. Trim ends of wool if necessary.

 

The pattern can easily be adapted to make larger or smaller owls but please be safety conscious and remember they are not toys.

Thanks to Karen for this brilliant little tutorial. 

That's it for this week's make.  We're more than half way through now but we've got lots of exciting projects to look forward to over the next few weeks.

Happy stitching!

 

Continue reading →

On The Fourth Day of Christmas

Posted on October 30, 2015 by Rae | 0 comments

 

We made a lovely little Christmas decoration using French General's collection for Moda, Joyeux Noel.

 

You will need:

  • A piece of Joyeux Noel - Atelier du Pere Noel (you could use any fabric that has a 5-10cm tall motif but this particular fabric lends itself beautifully to fussy cutting!
  • a length of ricrac or very narrow ribbon
  • two buttons
  • dried cloves, cinnamon, and cranberries or toy stuffing or wool balls

 

1. Choose two designs and roughly cut them out with a border

 2. Place the two pieces right sides together and line them up evenly and pin in place. You might want to hold them up to the light to get them spot on.

 3. Make a loop out of your thread, ribbon or ricrac and fold it inside the two pieces of fabric with a little tail protruding out of the top. Hand stitch a few stitches to anchor it in place.

 4. Stitch around the outside of the shape, making sure you leave a 3-5cm gap for turning.  Make sure you reinforce the beginning and end of your stitching to make sure it doesn't split when turning.

 5. Snip into the seam allowance at of corners, being really careful not to snip into your stitches!

6. Turn your decoration in the right way.

7. Here's the other side!

8. Fill with your chosen filling and hand stitch the opening shut

9. Hand sew the ricrac around the join and tie a bow at the top, underneath the hanging string

10. Thread a button onto the hanging string and you're done!

 Check back next week for the first of our Christmas gift makes!

 

Continue reading →

On the Third Day of Christmas ...

Posted on October 21, 2015 by Rae | 2 comments

Sam made us a free motion embroidered Christmas Village!  You could put this lovely piece of art/sewing into a frame or directly onto a card for  very special Christmas greeting... use it for gift tags, napkin rings, your imagination is the limit!

We're so lucky to have Sam Molloy as one of the brilliant tutors that run classes here at Make HQ - check our Sam's blog here where she records her adventures in stitching. One of Sam's most popular classes is her Free Motion Embroidery workshop and if you fancy coming along we've just put another class on in January - time to drop some well placed hints for a Christmas present, maybe?

 

 

 

Now it's over to Sam for her fantastic tutorial...


You will need:

  • Base fabric – this is what your picture will be stitched onto, so you need to choose something firm and stable.
  • Christmas fabric. In this tutorial I’ve used Christmas Dreams Christmas Village by Wendy Kendall for Dashwood Studio.
  • Iron on interfacing.  
  • Bondaweb
  • Tissue paper or greaseproof paper.
  • A darning or embroidery foot for your sewing machine.

Choose a Christmas fabric with a nice simple design, you’re going to be cutting the design out and sewing around the edges of the pieces, so the more intricate the initial design, the more intricate your cutting and sewing need to be!

 

First prepare your backing fabric by ironing a piece of medium weight iron on interfacing to the back. It doesn’t need to cover the entire fabric, just the area you will be stitching into later. This is to stabilise your backing fabric and prevent it stretching when you sew.

 

Roughly cut out the elements of the design on the Christmas fabric you want to use and place them right side up on the ‘glue’ side of a piece of Bondaweb.

 

 

Place a piece of greaseproof paper over the Bondaweb and press with a hot iron to melt the glue so that it adheres to the back of the fabric. Please remember the greaseproof paper, otherwise you’ll have to spend the next hour cleaning glue off your iron!

 

Peel the fabric pieces from the Bondaweb backing, cut them out neatly and arrange them in your chosen design on the backing fabric.

 

 

If you’re going to layer the pieces, you will need to apply and stitch the bottom layers first, so at this point it might be helpful to take a photo of your design to help you can remember where everything went.  Iron any pieces that will be part of the ‘bottom’ layer onto the backing, using a piece of greaseproof paper between the fabric and the iron to prevent any remaining glue from catching on the iron.

 

 

Put your darning or embroidery foot on your sewing machine and lower your feed dogs. You’re now ready to start stitching your design in place. Carefully stitch round each piece of your image separately. I like to use black thread and go round twice, to form a more solid outline, but you can experiment to see what looks good to you.

 

You can just go around the edge, or stitch into the fabric design to pick certain elements out.

 

 

Once you’re happy with the bottom layer, you can add your other pieces, once again placing a piece of greaseproof paper between the fabric and the iron.

 

Stitch the second, and any subsequent, layers in the same way as the first, adding as much detail as you like. You can see I decided to change the position of one of my trees when I came to do this layer.

 

 

Mount or frame your finished free motion embroidery. A small embroidery with one or two elements would look great as a Christmas card, a much larger one could be used to make a cushion cover or you could even make a set to use as placemats for your Christmas table. The choice is yours!

 

We hope we've inspired you to get your darning foot out and give this a go?  Check back soon for the HQ Fourth Make of Christmas!

 

 

 

Continue reading →

On the Twelth Day Of Christmas

Posted on December 27, 2014 by Rae | 0 comments

Charlie Deighton gave to us ...
Charlie's Christmas Angels!

OK, so this is it - the final of our 12 Christmas makes, courtesy of the lovely Charlie Deighton ...

Incredibly simple and very beautiful Christmas Angels

I have made my angels from a few pages of sheet music, but you could you use any paper or fabric you fancy...pages from old books work well too.  If using fabric for the angel's robes, I would iron some interfacing to the reverse of the fabric to give it some stiffness so that it holds its shape.  The wings can then be cut from paper (per instructions below, or a double layer of lace works beautifully too).

 

For each pair of Angels, you will need....

 

 

Paper Angels

2 wooden dolly pegs

1 A4 sheet of your chosen paper (or 4 pages from a book)

Double sided sticky tape (or glue)

Glue

Glitter (optional)

Ribbon or cord to hang the angel

Scissors

Instructions

  1. Take your paper and if using a sheet of A4, fold it in half and tear/cut and then fold each 'half' in half again so that you have four quarters (A6 size).

 

 

 

  1. Take one of the cut pieces of paper and position your dolly peg along the left hand side of the paper; cut the paper to size so that it just clears the 'feet' of the peg.

 

 

 

  1. Fix some double sided sticky tape along the length of the opposite side (see photo) or use glue if you prefer.  Then holding the 'neck' of the peg dolly firmly in place, start to roll the peg across the paper so that it wraps around the peg.  After one turn, start to twist the peg slightly upwards so that the paper forms a 'funnel' shape at the base of the peg. This can take a little practise but gets easier!

 

 

  1. Keep rolling until the edge of the paper meets the tape/glue and is fixed in place.

 

  1. Next, take another piece of your paper and fold it in half; cut the angel's wings and open out flat.  Fix a piece of double sided tape/glue to the centre of the wings.

 

 

  1. Cut a piece of cord/ribbon long another to form a loop so that the angel can be hung from your tree.  Secure the loop in place by sticking it over the double sided tape/glue.
  2. Put a little glue on the 'head' of the peg dolly and then dab it in a little glitter to create a lovely halo.

 

  1. Place your sparkly peg dolly in place on top of the wings, press down to ensure it's secure, smile, and sit back to admire your handy work and beautiful Christmas Angel!

  

There are so many variations to try...I have used fabric for the Angel's robes and lace for their wings, or why not use a mixture of fabric and paper?  A lovely and simple little project to try with children too.

 

Thank you Charlie and thanks again to all the lovely ladies who contributed to this blog series.  All that remains is for us both to wish you a very jolly Christmas, indeed!
 Happy Christmas!
Jacqui and Rae

Continue reading →

 
Scroll to top